March 28, 2024

Calendar


Events in February 2020

  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 1, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 1, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 2, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 3, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 3, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 3, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 3, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Electronics User Group

    Electronics User Group


    February 3, 2020

    This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Elements of Cosplay Group

    Elements of Cosplay Group


    February 3, 2020

    Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 3, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 4, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 4, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 4, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    High Speed Filming Lab Sessions

    High Speed Filming Lab Sessions


    February 4, 2020

    Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 4, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 5, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 5, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 5, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Learning CNC Machining

    Learning CNC Machining


    February 5, 2020

    Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 5, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 5, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 6, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Learning Laser Cutting & Processing

    Learning Laser Cutting & Processing


    February 6, 2020

    Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.

    Makerspace Laser Lab
    300 Ukrop Way
    Room 269
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 6, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 6, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the Ukrop Design Studio

    Rapid Prototyping at the Ukrop Design Studio


    February 6, 2020

    At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.

    01 Ukrop Way #2052
    Miller Hall
    Williamsburg, Va. 23185

    More information

    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 6, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 7, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 7, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Build-a-Brain Workshop (a User Group)

    Build-a-Brain Workshop (a User Group)


    February 7, 2020

    This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.

    Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.

    This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the IE Hub (Tribe Square)

    Rapid Prototyping at the IE Hub (Tribe Square)


    February 7, 2020

    Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.

    Innovation & Entrepreneurship Center at Tribe Square
    249 Richmond Rd.
    Williamsburg, Va. 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 8, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 8, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 9, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 10, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 10, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 10, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 10, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Electronics User Group

    Electronics User Group


    February 10, 2020

    This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Elements of Cosplay Group

    Elements of Cosplay Group


    February 10, 2020

    Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 10, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 11, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 11, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 11, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    High Speed Filming Lab Sessions

    High Speed Filming Lab Sessions


    February 11, 2020

    Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 11, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 12, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 12, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 12, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Learning CNC Machining

    Learning CNC Machining


    February 12, 2020

    Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 12, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 12, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 13, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Learning Laser Cutting & Processing

    Learning Laser Cutting & Processing


    February 13, 2020

    Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.

    Makerspace Laser Lab
    300 Ukrop Way
    Room 269
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 13, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 13, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the Ukrop Design Studio

    Rapid Prototyping at the Ukrop Design Studio


    February 13, 2020

    At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.

    01 Ukrop Way #2052
    Miller Hall
    Williamsburg, Va. 23185

    More information

    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 13, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 14, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Advanced 3D Modelling & Woodshop User Group

    Advanced 3D Modelling & Woodshop User Group


    February 14, 2020

    Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 14, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Build-a-Brain Workshop (a User Group)

    Build-a-Brain Workshop (a User Group)


    February 14, 2020

    This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.

    Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.

    This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the IE Hub (Tribe Square)

    Rapid Prototyping at the IE Hub (Tribe Square)


    February 14, 2020

    Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.

    Innovation & Entrepreneurship Center at Tribe Square
    249 Richmond Rd.
    Williamsburg, Va. 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 15, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 15, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 16, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 17, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 17, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 17, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 17, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Electronics User Group

    Electronics User Group


    February 17, 2020

    This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Elements of Cosplay Group

    Elements of Cosplay Group


    February 17, 2020

    Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 17, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 18, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 18, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 18, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    High Speed Filming Lab Sessions

    High Speed Filming Lab Sessions


    February 18, 2020

    Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 18, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 19, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 19, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 19, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Learning CNC Machining

    Learning CNC Machining


    February 19, 2020

    Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 19, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 19, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 20, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Learning Laser Cutting & Processing

    Learning Laser Cutting & Processing


    February 20, 2020

    Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.

    Makerspace Laser Lab
    300 Ukrop Way
    Room 269
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 20, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 20, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the Ukrop Design Studio

    Rapid Prototyping at the Ukrop Design Studio


    February 20, 2020

    At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.

    01 Ukrop Way #2052
    Miller Hall
    Williamsburg, Va. 23185

    More information

    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 20, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 21, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Advanced 3D Modelling & Woodshop User Group

    Advanced 3D Modelling & Woodshop User Group


    February 21, 2020

    Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 21, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Build-a-Brain Workshop (a User Group)

    Build-a-Brain Workshop (a User Group)


    February 21, 2020

    This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.

    Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.

    This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the IE Hub (Tribe Square)

    Rapid Prototyping at the IE Hub (Tribe Square)


    February 21, 2020

    Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.

    Innovation & Entrepreneurship Center at Tribe Square
    249 Richmond Rd.
    Williamsburg, Va. 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 22, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 22, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 23, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 24, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 24, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 24, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 24, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Electronics User Group

    Electronics User Group


    February 24, 2020

    This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Elements of Cosplay Group

    Elements of Cosplay Group


    February 24, 2020

    Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 24, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 25, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 25, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 25, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    High Speed Filming Lab Sessions

    High Speed Filming Lab Sessions


    February 25, 2020

    Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 25, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 26, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 26, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 26, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Learning CNC Machining

    Learning CNC Machining


    February 26, 2020

    Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 26, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 26, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 27, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Learning Laser Cutting & Processing

    Learning Laser Cutting & Processing


    February 27, 2020

    Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.

    Makerspace Laser Lab
    300 Ukrop Way
    Room 269
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 27, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 27, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the Ukrop Design Studio

    Rapid Prototyping at the Ukrop Design Studio


    February 27, 2020

    At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.

    01 Ukrop Way #2052
    Miller Hall
    Williamsburg, Va. 23185

    More information

    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 27, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 28, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Advanced 3D Modelling & Woodshop User Group

    Advanced 3D Modelling & Woodshop User Group


    February 28, 2020

    Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    30 Min Intro to 3D Modelling & Printing

    30 Min Intro to 3D Modelling & Printing


    February 28, 2020

    3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185
    Build-a-Brain Workshop (a User Group)

    Build-a-Brain Workshop (a User Group)


    February 28, 2020

    This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.

    Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.

    This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    Rapid Prototyping at the IE Hub (Tribe Square)

    Rapid Prototyping at the IE Hub (Tribe Square)


    February 28, 2020

    Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.

    Innovation & Entrepreneurship Center at Tribe Square
    249 Richmond Rd.
    Williamsburg, Va. 23185
  • MSE On-Duty (Makerspace Engineering Center)

    MSE On-Duty (Makerspace Engineering Center)


    February 29, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Makerspace Center
    300 Ukrop Way
    Room 224
    Williamsburg, VA 23185
    MSE On-Duty (Swem Library)

    MSE On-Duty (Swem Library)


    February 29, 2020

    During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.

    Make sure to check the location on this posting.

    Swem Library Makerspace
    400 Landrum Drive
    Williamsburg, VA 23185