–
March 1, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 2, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 2, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 2, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 2, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 2, 2020
This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
–
March 2, 2020
Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
–
March 2, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 3, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 3, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 3, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 3, 2020
Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.
–
March 3, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 4, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 4, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 4, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 4, 2020
Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
–
March 4, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 4, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 5, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 5, 2020
Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
–
March 5, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 5, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 5, 2020
At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
–
March 5, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 6, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 6, 2020
Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!
–
March 6, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 6, 2020
This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
–
March 6, 2020
Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
–
March 7, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 7, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 8, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 9, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 9, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 9, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 9, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 9, 2020
This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
–
March 9, 2020
Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
–
March 9, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 10, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 10, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 10, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 10, 2020
Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.
–
March 10, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 11, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 11, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 11, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 11, 2020
Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
–
March 11, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 11, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 12, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 12, 2020
Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
–
March 12, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 12, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 12, 2020
At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
–
March 12, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 13, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 13, 2020
Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!
–
March 13, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 13, 2020
This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
–
March 13, 2020
Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
–
March 14, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 14, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 15, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 16, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 16, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 16, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 16, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 16, 2020
This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
–
March 16, 2020
Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
–
March 16, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 17, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 17, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 17, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 17, 2020
Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.
–
March 17, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 18, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 18, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 18, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 18, 2020
The Professional & Professional Faculty Assembly hosts Emergence, an ongoing brown bag lunch discussion series wherein we'll host a discussion on what's new and upcoming on campus.
Join us this month for meeting the Studio for Teaching & Learning and the Digital Scholarship Lab!
Location: Ford Classroom, Swem Library
–
March 18, 2020
Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
–
March 18, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 18, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 19, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 19, 2020
Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
–
March 19, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 19, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 19, 2020
At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
–
March 19, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 20, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 20, 2020
Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!
–
March 20, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 20, 2020
This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
–
March 20, 2020
Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
–
March 21, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 21, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 22, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 23, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 23, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 23, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 23, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 23, 2020
This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
–
March 23, 2020
Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
–
March 23, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 24, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 24, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 24, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 24, 2020
Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.
–
March 24, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 25, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 25, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 25, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 25, 2020
Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
–
March 25, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 25, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 26, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 26, 2020
Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
–
March 26, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 26, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 26, 2020
At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
–
March 26, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 27, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 27, 2020
Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!
–
March 27, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 27, 2020
This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
–
March 27, 2020
Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
–
March 28, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 28, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 29, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 30, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 30, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 30, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 30, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 30, 2020
This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
–
March 30, 2020
Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
–
March 30, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 31, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 31, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
–
March 31, 2020
3D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
–
March 31, 2020
Join the MSE team in the new high speed filming studio adjacent the Swem Makerspace to see how to use and setup a high speed recording. The camera is an Edgertron which can film at up to 30,000 frames per second. We will be looking for user input to see how to better outfit this studio for our communities' needs.
–
March 31, 2020
During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.