Events in February 2020
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Swem Library)
–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Electronics User Group–
Electronics User Group
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
Elements of Cosplay Group–
Elements of Cosplay Group
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Materials, Manufacturing & More–
Materials, Manufacturing & More
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the makerspace student led materials, manufacturing & more group wherein we'll explore a range of topics from 3D printing with different materials to basic, useful techniques in manufacturing, chemistry, and more. Such topics may include vacuum forming or electrodeposition of copper. It will change from week to week as we explore and discuss STEM from a variety of angles.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Learning CNC Machining–
Learning CNC Machining
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Learning Laser Cutting & Processing–
Learning Laser Cutting & Processing
Makerspace Laser Lab300 Ukrop WayRoom 269Williamsburg, VA 23185Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Rapid Prototyping at the Ukrop Design Studio–
Rapid Prototyping at the Ukrop Design Studio
Ukrop Design Studio01 Ukrop Way #2052Miller HallWilliamsburg, Va. 23185At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Build-a-Brain Workshop (a User Group)–
Build-a-Brain Workshop (a User Group)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
Rapid Prototyping at the IE Hub (Tribe Square)–
Rapid Prototyping at the IE Hub (Tribe Square)
Innovation & Entrepreneurship Center at Tribe Square249 Richmond Rd.Williamsburg, Va. 23185Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Swem Library)
–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Electronics User Group–
Electronics User Group
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
Elements of Cosplay Group–
Elements of Cosplay Group
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Materials, Manufacturing & More–
Materials, Manufacturing & More
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the makerspace student led materials, manufacturing & more group wherein we'll explore a range of topics from 3D printing with different materials to basic, useful techniques in manufacturing, chemistry, and more. Such topics may include vacuum forming or electrodeposition of copper. It will change from week to week as we explore and discuss STEM from a variety of angles.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Learning CNC Machining–
Learning CNC Machining
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Learning Laser Cutting & Processing–
Learning Laser Cutting & Processing
Makerspace Laser Lab300 Ukrop WayRoom 269Williamsburg, VA 23185Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Rapid Prototyping at the Ukrop Design Studio–
Rapid Prototyping at the Ukrop Design Studio
Ukrop Design Studio01 Ukrop Way #2052Miller HallWilliamsburg, Va. 23185At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Advanced 3D Modelling & Woodshop User Group–
Advanced 3D Modelling & Woodshop User Group
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Build-a-Brain Workshop (a User Group)–
Build-a-Brain Workshop (a User Group)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
Rapid Prototyping at the IE Hub (Tribe Square)–
Rapid Prototyping at the IE Hub (Tribe Square)
Innovation & Entrepreneurship Center at Tribe Square249 Richmond Rd.Williamsburg, Va. 23185Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Swem Library)
–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Electronics User Group–
Electronics User Group
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
Elements of Cosplay Group–
Elements of Cosplay Group
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Materials, Manufacturing & More–
Materials, Manufacturing & More
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the makerspace student led materials, manufacturing & more group wherein we'll explore a range of topics from 3D printing with different materials to basic, useful techniques in manufacturing, chemistry, and more. Such topics may include vacuum forming or electrodeposition of copper. It will change from week to week as we explore and discuss STEM from a variety of angles.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Learning CNC Machining–
Learning CNC Machining
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Learning Laser Cutting & Processing–
Learning Laser Cutting & Processing
Makerspace Laser Lab300 Ukrop WayRoom 269Williamsburg, VA 23185Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Rapid Prototyping at the Ukrop Design Studio–
Rapid Prototyping at the Ukrop Design Studio
Ukrop Design Studio01 Ukrop Way #2052Miller HallWilliamsburg, Va. 23185At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Advanced 3D Modelling & Woodshop User Group–
Advanced 3D Modelling & Woodshop User Group
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Build-a-Brain Workshop (a User Group)–
Build-a-Brain Workshop (a User Group)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
Rapid Prototyping at the IE Hub (Tribe Square)–
Rapid Prototyping at the IE Hub (Tribe Square)
Innovation & Entrepreneurship Center at Tribe Square249 Richmond Rd.Williamsburg, Va. 23185Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Swem Library)
–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Electronics User Group–
Electronics User Group
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted user group session will focus on learning electronics such as basic circuit theory, arduinos & raspberry Pis, and programming. Come join the fun and learn how to make your next IoT project or robot come to life.
Elements of Cosplay Group–
Elements of Cosplay Group
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185Join the makerspace student led elements of cosplay group, open to all, at the Swem Library Makerspace. In this group you will learn the techniques needed to produce an effective cosplay such as laser cutting, 3D printing, sewing & serging, vinyl cutting and more.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Materials, Manufacturing & More–
Materials, Manufacturing & More
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the makerspace student led materials, manufacturing & more group wherein we'll explore a range of topics from 3D printing with different materials to basic, useful techniques in manufacturing, chemistry, and more. Such topics may include vacuum forming or electrodeposition of copper. It will change from week to week as we explore and discuss STEM from a variety of angles.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Learning CNC Machining–
Learning CNC Machining
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Join the CNC machining user group led by our makerspace students to learn the techniques involved in CNC rapid prototyping. This will cover 3D modelling, toolpath generation, CNC mill / lathe & router operation, and more.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Learning Laser Cutting & Processing–
Learning Laser Cutting & Processing
Makerspace Laser Lab300 Ukrop WayRoom 269Williamsburg, VA 23185Join our laser cutting & processing user group. Led by a makerspace student, this group will learn and explore the applications of laser cutting and laser processing in our makerspace laser lab. Learn to cut and engrave a variety a materials including plastics, wood, and metals and understand modern manufacturing at a greater depth.
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
MSE On-Duty (Makerspace Engineering Center)–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Rapid Prototyping at the Ukrop Design Studio–
Rapid Prototyping at the Ukrop Design Studio
Ukrop Design Studio01 Ukrop Way #2052Miller HallWilliamsburg, Va. 23185At the Ukrop Design Studio's satellite Makerspace location a makerspace student will be leading a session every week going through the basics of rapid prototyping using a CNC router, vinyl cutter, and 3D printers. Join us to learn more about the basics of rapid prototyping and to plan out your next build.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
Advanced 3D Modelling & Woodshop User Group–
Advanced 3D Modelling & Woodshop User Group
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185Every Friday we'll host a session in the Makerspace Center (Small Hall) to work with the more advanced features and functions of 3D modelling and design. If it happens to be a warm sunny Friday, we'll switch this up to setup and use the outdoor woodshop. All are welcome to join!
30 Min Intro to 3D Modelling & Printing–
30 Min Intro to 3D Modelling & Printing
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 231853D modelling and printing are the future core of manufacturing & rapid prototyping. That's why we're here to help you learn and get certified every, single, weekday. Come join the fun for a half hour session every weekday at noon, and learn a new skill.
Build-a-Brain Workshop (a User Group)–
Build-a-Brain Workshop (a User Group)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185This MSE hosted session will be project specific and will focus on an ongoing effort to develop a robot to 3D print viscous materials, and generally be able to use syringes and pipettes to automatically dispense or print a wide variety of items at very low cost. The goal is to produce an open-source, high resolution system design for the world to use that is very low cost.
Specifically, the first applications we will we focusing on are the LifeInk Collagen Printing process for printing a nose ( https://www.youtube.com/watch?v=5jIEGiins84 ) and auto-pipetting of fluids.
This user group session will engage with robotics, mechanical design, 3d printing, fluid mechanics, programming, chemistry, biology, and much more. Come join the fun and help us create a great new tool at the Build-a-Brain Workshop.
Rapid Prototyping at the IE Hub (Tribe Square)–
Rapid Prototyping at the IE Hub (Tribe Square)
Innovation & Entrepreneurship Center at Tribe Square249 Richmond Rd.Williamsburg, Va. 23185Join us in the satellite makerspace at the new Innovation & Entrepreneurship Hub at Tribe Square for demonstrations of rapid prototyping techniques using a laser cutter, vinyl cutter and 3D printer. This will be makerspace student led and follow the weekly 'Rocket-Pitch' entrepreneurship competitions.
- MSE On-Duty (Makerspace Engineering Center)
–
MSE On-Duty (Makerspace Engineering Center)
Makerspace Center300 Ukrop WayRoom 224Williamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.
MSE On-Duty (Swem Library)–
MSE On-Duty (Swem Library)
Swem Library Makerspace400 Landrum DriveWilliamsburg, VA 23185During these times there will be a makerspace student engineer on-duty in the makerspace to help however we can. If you'd like one-on-one training in a new skill such as 3D modelling, or even tutoring in a STEM related topic; stop in as needed.
Make sure to check the location on this posting.